It’s a common sight these days seeing concrete pumps at construction sites. A concrete pump is an essential resource for any medium-sized or large-scale commercial project. This cutting edge concrete pump is equally economical and practical for both. For this reason, concrete pumps have taken up the mantle of transferring liquid concrete around construction sites.
Cranes were the machines previously used to take large buckets of concrete to wherever it’s required at the construction site. A major downside for this is that cranes were only able to hold around two cubic yards of concrete. Thus came the existence of concrete pumps that pump concrete more effectively.
However, there are different types Of pompa beton dijual di Indonesia offers. Here’s a look at some of them:
Boom Pump
Also called Truck-mounted pump, it’s attached on a truck and has a remote-controlled articulating hydraulic robotic arm, also referred to as a boom. These truck-mounted boom pumps are suitable for large construction sites or vast roads and highway projects due to their ability of pumping volumes of concrete in significantly less time. They are invaluable to construction projects, especially when concrete is needed in difficult to reach places.
Without the use of boom pumps: https://aimixgroup.com/concrete-pump-indonesia/, delivering concrete to such areas would need numerous and tiring trips to and fro with wheelbarrows. Boom pumps eliminate this inconvenience by accurate placing concrete where required. Most concrete Boom Pumps have two pistons and work with one pushing concrete through pipework while the other one draws concrete from the hopper. The agitator then mixes in the hopper to keep it ready for flowing through the piston system.
Boom pumps can extend up to approximately 72 meters with extension additions also available if needed. The pump can be stationed upstairs, over buildings and around obstacles where access may be restricted, to make sure that concrete is placed precisely where it’s needed. These pumps can transport large capacities of concrete within a short duration of time.
Trailer, Line, or Stationary Pump
This type of beton pump is attached on a trailer with rubber hoses and steel also attached to the outlet. The hoses can be attached and joined to other extension hoses to reach site locations where concrete is required. Trailer pumps operate at a lower rate and can thus be used in small jobs like sidewalks, concrete slabs and swimming pools. These pumps can deliver concrete at up to 1m3 per minute guaranteeing efficiency with the project going on uninterrupted. There will be no wastage, no spills and no hassle with this pump. It can extend up to 150 meters.
So are you looking to transport concrete to different locations of your site? Are there heights, obstacles or depths hindering movement? A concrete pump solves all of these concerns with an efficient and economical approach. They eliminate a lot of wasted time spent moving the loads back and forth different locations of the construction site. Discuss your concrete pump needs with a professional to make sure you have the right type for the job and avoid delays in the process.